Anyone with a ton of Color Flow LEDs on their car knows what its like to walk out to a dead battery. With all of the problematic solutions out there we think we have developed the perfect one.
After tons of testing and experimentation we have finally created a power saver we can be proud of. Our power saver is not just a relay, ours has 3 triggers on a 15sec delay. This makes it so your leds can finish their animations before cutting power. Our relay also has a remote with 2 modes, one is a 4th trigger that turns the relay on for shows, the other is an output that can go to a ghozt controller to activate the brake/show mode trigger for instant on show modes. Our power saver is good to 30amps so plenty of room for underglow, grills, heads, tails, whatever you want to run 30amps should cover it.
We are now offering 3D printed BlueGhozt Extension Boxes for a cleaner look. These will be made in black on the next round. Defective units when available are just $1 with the purchase of a power saver but there will be a limited availability of them. These boxes will need a seal added between the box and the BlueGhozt Box when potting, we recommend Gorilla Glue Contact Adhesive. 4 extended screws will be included with all boxes (screw size is #4 - 1-1/2").
We have been using this design on our own builds for a while now and now you can too. Take it to the Next Level!
With the help of a friend we have designed a box that will house the battery saver and screw onto the BlueGhozt box. The file can be downloaded here and printed on a 3d printer. You will need some kind of a gasket to go between the power saver and BlueGhozt box, and you will need small screws to secure the power saver and 4 (#4 - 1.5") screws to secure the 2 boxes together.