The ZO-95 is for the builder needing a little more time and power between cool down cycles. This cutter makes opening lights a breeze, Extended cutting times is not a problem with the beefy horn and the addition of the S-High cutting mode makes cutting even faster. Compatible with our entire lineup of Echo Tech parts this cutter has a ton of versatility.
“S-High mode” works to cut the object 1.5 times faster than the conventional model.*1
Torque screwdriver ZH25T and Foot switch ZH801 (foot switch for ZO-95).
(Torque screwdriver ZH25T) (Foot switch ZH801)
Plug into the connector on the rear panel of ZO-95 to turn on and off ultrasonic vibration by the foot switch.
|Max. power consumption
||Max. 110 VA
||AC adapter INPUT: 100-240 V AC 50/60 Hz OUTPUT: 12 V DC
|External dimensions (Unit: mm)
Main unit(Generator): 185*169*55
|Power mode switch
Temperature: 10 to 35 ℃
Main unit(Generator): Approx. 1.2 Kg
Hand-piece: Approx. 350g
(including hand-piece cable)
BDC-200P: 40 pcs./1 case
(including blades with a hole)
Blade anchor ZH04: 1 pc.
Blade anchor screw HB03: 1 pc.
Hexagon wrench RR02: 1 pc.
Torque screwdriver ZH25T: 1 pc.
Foot switch ZH801: 1 pc.
*1 Based on the comparison with the cutting speed of ZO-91 in High mode when 2mm thick acrylic is cut by the force of 2kgs.
*2 Ambient condition doesn’t guarantee the performance of operation under the temperature.